Turning Point Masterguard Propeller Hub – 501 Kit

TURNING POINT MASTERGUARD PROPELLER HUB FOR 40-150HP / 90-300+HP OUTBOARD MOTORS WITH A 4.25″ / 4.75″ GEARCASE (501KIT)500 Series Installation Kits. The Turning Point Masterguard Propeller Hub System enables the end-user to economically carry a spare or different diameter/pitch propeller to suit the days skiing, fishing or cruising activities.The MasterGuard Hub design utilises shock and vibration absorbing polymers for unmatched dependability.Lifetime warranty for engines under 200hp.Premium corrosion-resistant brass splines.Eliminate hub system vibration & chatter.Reduce gear shock & engine/drive damage.Reduce prop replacement cost by up to 50%NOTE: Not applicable withTurning Points 10, 20 and 200 Hub Kit series.NOTE:**Motors 200HP and above must use series 700 Hub Kits. Failure to use will void warranty.Choosing your Turning Point propeller is a two-step process:Select the Installation Kit to suit the drive shaft on your outboard. Check the table below for your engine model. If not listed, thensee other Turning Point hub kits.Choose the:Turning Point Aluminium 3 Blade Hustler propeller LE Modelfor (90-300+HP) or,3 Blade LE1/LE2 Modelfor (40-150HP)Turning PointAluminium 4Blade HustlerpropellerLE Modelfor (90-300+HP) or,4 Blade LE1/LE2 Modelfor (40-150HP)Turning Point Mach3 Express 3 Blade Stainless Steel propellerEX Modelfor (90-300HP) or,3 Blade EX1/EX2 Modelfor (40-150HP)Turning PointMach4 Express 4 Blade Stainless Steel propellerEX Modelfor (90-300HP) or,4 Blade EX1/EX2 Modelfor (40-150HP)Turning Point Mach3 OS Express 3 Blade Stainless Steel propellerto these hub kits (all sold separately)ManufacturerSplinesSuits ModelSuits EnginesNotesForce1575hp (’99) / 90hp to 150hp (’95+)40-150HP with 4.25″ GearcaseHonda15(’95-’98): 75hp, 90hp40-150HPwith 4.25″ GearcaseMercury & Mariner152 & 4 stroke) 40 to 60 Bigfoot / 70 (87-89) / 75, 80 (78-89), 90, 100, 115, 125, 140hp / 150 XR4/6 (thru 1993, includes equivalent Mariner Magnum I, II, III.) EFI CT & SeaPro 4cyl: 40 to 75hp / OptiMax: 75, 90, 115, 125hp40-150HPwith 4.25″ GearcaseProps Not Available for ’77 & Older modelsSuzuki & Johnsonuse 4 blade props onlyDF 4 stroke: 50AV, 60AV, 115A, 140, 140A40-150HPwith 4.25″ GearcaseMercury & Mariner15EFI CT / SeaPro : 90 to150hp / V6 & I6: 135 to 300hp /Verado 135 to 300hp(not HD) / OptiMax: 150, 200, 250hp90-300+HPwith 4.75″ GearcaseUse 701 Super Duty Kit for 200+hp Engines.115hp ProXS CT Only; For ProXS & Verado w/ 1.25 propshaft, use Mercury Solid Hub kit with the Turning Point Prop.Mercruiser15Alpha One and Bravo One (’83+)90-300+HPwith 4.75″ GearcaseUse 701 Super Duty Kit for 200+hp Engines.If propeller strikes trim tab, replace with Mercury part822777A1.Use the Turning Point Prop Wizard to find your Installation Kit & Propeller Housing